Comtech EF Data CRS-500, Инструкция по установке и эксплуатации

Страница: 178 / 220

CRS-500 1:N Redundancy System
Revision 4
Serial Interface Operation 10–14 MN-CRS-500
Parameter
Type
Controller-to-Target
Instruction Code and Qualifier Arguments for
Command or
Query
Description of Arguments
(Note that all arguments are ASCII numeric codes – i.e.,
ASCII codes between 48 and 57)
Target-to-Controller
Command Query
Response to
Command
Response to Query
(see Description of
Arguments)
Local/Remote
Status
LRS= LRS? 1 byte Command or Query.
Sets or returns the local/remote status of the Switch in the form x, where:
0 = Local (CSU Front Panel)
1 = Ethernet
2 = Ethernet
LRS=
LRS?
LRS=x
MAC Address N/A MAC? 12 bytes Query only.
Returns the unique MAC Address for the Switch.
QUERY RESPONSE EXAMPLE: >0000/MAC = 0006B00001CA{CR}{LF}
N/A MAC=aabbccddeeff
SNMP Read
Community
SRC= SRC? Up to 20 bytes Command or Query.
Sets or returns the SNMP Read Community string.
NOTES:
Empty string is not allowed.
20 characters maximum are permitted.
Reboot is required in order for changes to the Read Community string to take
effect.
COMMAND EXAMPLE: <0000/SRC=public{CR}
SRC =
SRC!
SRC=x…x
SNMP Write
Community
SWC= SWC? Up to 20 bytes Command or Query.
Sets or returns the SNMP Write Community string.
NOTES:
Empty string is not allowed.
20 characters maximum are permitted.
Reboot is required in order for changes to the Write Community string to take
effect.
COMMAND EXAMPLE: <0000/SWC=private{CR}
SWC =
SWC!
SWC=x…x