Comtech EF Data CRS-500, Инструкция по установке и эксплуатации

Страница: 109 / 220

CRS-500 1:N Redundancy System
Revision 4
Firmware Update 6–13 MN-CRS-500
6.3 Upload the Bulk Firmware Files and Update the CRS-500
6.3.1 Prepare for the Automated Firmware Update
Before you proceed with the firmware update, make sure that:
•
You connect the modem M&C Ethernet port to the User PC as described in Section
6.2.1.1.
•
Your PC is running a terminal emulation program for operation of the CRS-500 Serial or
Ethernet Telnet interfaces.
•
You have noted the CRS-500 Management IP Address.
•
Your PC is running a compatible Web browser for operation of the CRS-500 HTTP
Interface.
•
You download or otherwise have Comtech’s latest firmware files available on the User PC
in an accessible temporary folder.
6.3.2 Perform the Automated Firmware Update
Do these steps:
1. From the CRS-500 HTTP Interface, click ‘ Utility |Upload .’
2. To upload the firmware update file: Click [Browse] to locate and select the firmware file
downloaded previously into the User PC’s temporary folder. Click [Upload] to begin the
update process, and then wait while the scrolling “ File Upload Progress: ” status bar
displays the upload progress:
3. Once the file uploads to CSU flash memory, the Bulk Image file that is not currently
selected as the ‘ Boot From:’ image will be overwritten (that is, if you select Image#1 as
the current boot image then, accordingly, the Image#2 file slot is automatically chosen for
replacement).