Comtech EF Data CRS-500, Инструкция по установке и эксплуатации

Страница: 147 / 220

CRS-500 1:N Redundancy System
Revision 4
Ethernet Interface Operation 9–5 MN-CRS-500
9.3.2 Using HyperTerminal for Telnet Remote Control Operation
Figure 9-2. Telnet Interface Example – HyperTerminal
There is a disadvantage when using Windows Command line as a Telnet client with the optional
Remote Control protocol. For the messages coming from the Telnet Server, Command line
cannot translate a carriage return command (
\r ) to a carriage line feed command ( \r\n ).
Therefore, any multi-line Target-to-Controller response (e.g., the Target response to the FRW?
query) shows as one line, with the latter lines overwriting the previous lines.
To see the full response messages, you can use the HyperTerminal terminal emulation program
configured as a Telnet client. Figure 9-2
shows an example of the login process and remote
control operation, when using HyperTerminal as the Telnet interface.