Comtech EF Data CRS-500, Инструкция по установке и эксплуатации

Страница: 110 / 220

CRS-500 1:N Redundancy System
Revision 4
Firmware Update 6–14 MN-CRS-500
The Image Upgrade Progress status window appears and displays, by scrolling
percentage of completion, the file transfer progress:
Once the transfer has completed (i.e., 100%), the “Firmware Application Process
Complete!” message appears:
4. Open the ‘Utility | Boot Slot’ page. Use the ‘ Boot From: ’ drop-down list to verify that the
new firmware is reported in the unselected Image slot (depending on how the ‘ Boot
From: ’ setting was defined prior to the firmware file upload process):
Select the desired ‘ Boot From: ’ preference. Note the following:
•
Latest – Automatically chooses the Image containing the most recent firmware
upload;
•
Image #1 – Chooses the Image loaded into Slot 1;
•
Image #2 – Chooses the Image loaded into Slot 2.
Click [Apply] to commit the selection to memory. From this point forward, the system will reboot
using this selection, until you choose otherwise.