ID-FLX Lite Global Guide
65
PI loop and Hysteresis comparator functions can be used for Engine Load Limitation or for any other control
function.
IMPORTANT: Regulator is working permanently in AUT mode.
In table below see different operation conditions.
Condition
Analog output
LoadLimitAnOut
Binary output
Load switch
OFF mode
=0
=0
MAN mode
In operation
In operation
AUT mode
In operation
In operation
Running
In operation
In operation
Stop = Not Running
In operation
In operation
Sd protection
Load limit: Bias
LBI L Reg Disable = 1
Load limit: Bias
Functions 1 and 2
LBI
Active input
LoadRequest2
Switch to Load Request 2
LoadRegDisable
Set PI Regulator output to constant P Bias
Regulator is working when this LBI is not configured.
LBO
Function
LoadSwitch
Load Comparator output (Up/Down Limit)
Содержание InteliDrive FLX LITE
