Cisco ONS 15310-MA SDH, Руководство по процедурам

Страница: 569 / 632

18-69
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
78-19416-01
Chapter 18 DLPs H200 to H299
Step 5
If the GNE Login Required box is checked, complete the following steps. If not, continue Step 6 .
a. In the Login to Gateway NE dialog box UID field, enter the TL1 user name.
b.
In the PID field, enter the TL1 user password.
c. Click OK .
Step 6
When the CTC Login dialog box appears, complete the CTC login.
Step 7 Return to your originating procedure (NTP).
DLP-H270 Create a TL1 Tunnel Using CTC
Step 1
From the Tools menu, choose Manage TL1 Tunnels .
Step 2
In the TL1 Tunnels window, click Create .
Step 3 In the Create CTC TL1 Tunnel dialog box, enter the following:
•
Far End TID—Enter the TID of the ONS ENE at the far end of the tunnel. The ENE must be a
Cisco ONS NE. The TID is the name entered in the Node Name field on the node view Provisioning
> General tab.
• Host Name/IP Address—Enter the GNE DNS host name or IP address through which the tunnel will
established. This is the third-party vendor GNE that is connected to an ONS NE with an OSI DCC.
CTC uses TCP/IP over a DCN to reach the GNE. The GNE accepts TL1 connections from the
network and can forward TL1 traffic to the ENEs.
•
Choose a port option:
–
Use Default TL1 Port—Choose this option if you want to use the GNE default TL1 port. TL1
uses standard ports, such as 3081 and 3082, unless custom TL1 ports are defined.
–
Use Other TL1 Port—Choose this option if the GNE uses a different TL1 port. Enter the port
number in the box next to the User Other TL1 Port radio button.
•
TL1 Encoding Mode—Choose the TL1 encoding:
–
LV + Binary Payload— TL1 messages are delimited by LV (length value) headers and TCP
traffic is encapsulated in binary form. Cisco recommends this option because it is the most
efficient. However, you must verify that the GNE supports LV + Binary Payload encoding.
– LV + Base64 Payload— TL1 messages are delimited by LV headers and TCP traffic is
encapsulated using Base64 encoding.
–
Raw—TL1 messages are delimited by semi-columns only, and the TCP traffic is encapsulated
using Base64 encoding.
Purpose This task creates a TL1 tunnel using CTC.
Tools/Equipment None
Prerequisite Procedures DLP-H29 Log into CTC, page 16-43
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level None