Cisco ONS 15310-MA SDH, Руководство по процедурам

Страница: 394 / 632

16-104
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
78-19416-01
Chapter 16 DLPs H1 to H99
Step 3
In the Show Severity area, click the check boxes for the severities [Critical (CR), Major (MJ ) , Minor
(MN), or Not-Alarmed (NA)] you want to be reported at the network level. Leave severity check boxes
deselected (unchecked) to prevent those severities from appearing.
When alarm filtering is disabled, all alarms show.
Step 4
In the Time area, click the Show alarms between time limits check box to enable it. Click the up and
down arrows in the From Date, To Date, and Time fields to modify what period of alarms are shown.
To modify filter parameters for conditions, continue with Step 5 . If you do not need to modify them,
continue with Step 6 .
Step 5
Click the filter dialog box Conditions tab ( Figure 16-24 ).
Figure 16-24 Alarm Filter Dialog Box Conditions Tab
When filtering is enabled, conditions in the Show list are visible and conditions in the Hide list are
invisible.
• To move conditions individually from the Show list to the Hide list, click the > button.
•
To move conditions individually from the Hide list to the Show list, click the < button.
• To move conditions collectively from the Show list to the Hide list, click the >> button.
•
To move conditions collectively from the Hide list to the Show list, click the << button.
Note
Conditions include alarms.
Step 6
Click Apply and OK .
Alarm and condition filtering parameters are enforced when alarm filtering is enabled (see the
“DLP-H84 Enable Alarm Filtering” task on page 16-102 ), and the parameters are not enforced when
alarm filtering is disabled (see the “DLP-H88 Disable Alarm Filtering” task on page 16-107 ).
Step 7
Return to your originating procedure (NTP).