Cisco ONS 15310-MA SDH, Руководство по процедурам

Страница: 338 / 632

16-48
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
78-19416-01
Chapter 16 DLPs H1 to H99
Step 1 From the CTC File menu, click Add Node .
Step 2
In the Add Node dialog box, enter the node name (or IP address).
Step 3 If you want to add the node to the current login group, check Add node to current login group .
Otherwise, leave it unchecked.
Note This check box is active only if you selected a login group when you logged into CTC.
Step 4 Click OK .
After a few seconds, the new node appears on the network view map.
Step 5 Return to your originating procedure (NTP).
DLP-H33 Delete a Node from the Current Session or Login Group
Step 1
From the View menu, choose Go to Network View .
Step 2
Click the node that you want to delete.
Step 3
From the CTC File menu, click Delete Selected Node .
After a few seconds, the node disappears from the network view map.
Step 4
Return to your originating procedure (NTP).
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher
Purpose This task removes a node from the current CTC session or login node
group. To remove a node from a specified login node group, see the
“DLP-H34 Delete a Node from a Specified Login Node Group” task on
page 16-49
.
Tools None
Prerequisite Procedures DLP-H29 Log into CTC, page 16-43
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher