Getting Started
Starting NAS Configuration
Cisco Small Business NSS300 Series Smart Storage Administration Guide
27
2
The server name can be a maximum length of 14 characters, which supports
alphanumeric characters (a-z, 0-9) and hyphens (-). It is required that the server
name begin with a letter versus a number. The server name does not accept
names with a space or period (.)
STEP 13
Click
Next
. You are redirected to a window where you can change the
administrator password.
NOTE
The default administrator username is
admin.
The default administrator password
is
admin
.
STEP 14
Change the administrator password by entering the new password in the
Password field. To verify the password, re-enter it in the Verify Password field.
STEP 15
Click
Next
. You are redirected to a window where you can enter the date, time,
and time zone for the server.
STEP 16
Enter the date, time, and time zone for this server. The options are:
•
Time Zone
—Select a time zone from the drop-down menu.
•
Date/Time
—Select the current date and time from the drop-down menus.
•
Synchronize with an Internet time server automatically
—To obtain time
automatically from an NTP server, click this check box.
•
Server
—From the drop-down list, select the NTP server name and click
TEST
to verify status.
For example:
-
time-a.timefreq.bldrdoc.gov (default)
-
time-b.timefreq.bldrdoc.gov
-
time-c.timefreq.bldrdoc.gov
•
Set the server time the same as your computer time
—To synchronize the
server time/clock with the time/clock on your computer, click this check box.
STEP 17
Click
Next
. You are redirected to a window where you can enter the IP address,
subnet mask, and default gateway for the device.
STEP 18
Enter the IP address, subnet mask, and default gateway for this server. You can
either acquire the IP address automatically from a DHCP server or choose to
configure a static IP address.
•
Obtain TCP/IP settings automatically via DHCP
—Click this check box to
acquire the IP address from a DHCP server. This is enabled by default.
