Managing the System
Network Services
Cisco Small Business NSS300 Series Smart Storage Administration Guide
149
3
does not support Unicode, select
No
for Unicode Support and select a supported
filename encoding from
Administration > General
Settings so that folders and
files can be displayed correctly.
STEP 6
You can enable or disable anonymous login to the FTP site by clicking
Yes
(enabled) or
No
(disabled) in the Enable Anonymous field. The default setting is
No
.
STEP 7
Enter the FTP Connection parameters:
•
Maximum number of all FTP connections
—Maximum number of clients
that can be connected at the same time. The upper limit is 256.
•
Maximum Number of Connections for a Single Account
—Maximum
number of connections for a single account. The upper limit is 256.
•
Enable FTP transfer limitation
—Click to set the values for FTP transfer
limitation.
-
Maximum upload rate (KB/s)
—Enter the maximum upload value.
-
Maximum download rate (KB/s)
—Enter the maximum download value.
STEP 8
Enter Advanced FTP parameters:
•
Passive FTP Port Range
—You can use the default port range (55536-
56559) or define a port range higher than 1024.
•
Respond with external IP address for passive FTP connection request
—
You can enable this function when a remote computer is not able to connect
to the FTP server using a WAN connection where the FTP server is behind a
router/firewall. When this function is enabled the FTP server returns the
manually specified IP address or automatically detects the external IP
address so that the remote computer can connect to the FTP server
successfully.
STEP 9
Click
Apply
. Your FTP service settings are updated to the NAS.
