Cisco NSS 300 Series Скачать руководство пользователя

Страница: 125 / 265

Managing the System

Disk Management

Cisco Small Business NSS300 Series Smart Storage Administration Guide

125

In the

Target Management

window, there are a number of actions that you can

perform as described below:

Action Icons

LUN

Enabled

The LUN is active for connection
and is visible to authenticated
initiators.

Disabled

The LUN is inactive and is invisible
to the initiators.

Action

Description

Deactivate

Click this icon to deactivate a ready or connected target.
Note that the connection from the initiators will be
removed.

Activate

Click this icon to activate an offline target.

Modify

Click this icon to modify the target settings, such as target
alias, CHAP information, and checksum settings.

Click this icon to modify the LUN settings, such as LUN
allocation, name, and disk volume directory.

Delete

Click this icon to delete an iSCSI target. All the
connections will be removed.

Disable

Click this icon to disable a LUN. All the connections will be
removed.

Enable

Click this icon to enable a LUN.

Unmap

Click this icon to unmap the LUN from the target. Note that
you must disable the LUN first before unmapping the LUN.
When you click this icon, the LUN will be moved to the
Un-Mapped iSCSI LUN List.

Map

Click this icon to map the LUN to an iSCSI target. This
option is only available from the Un-Mapped iSCSI LUN
List.

Item

Status

Description

Содержание NSS 300 Series










































































































































































































































































Результаты поиска

Содержание NSS 300 Series

Отзывы:

Похожие инструкции для NSS 300 Series

Бренды по названию

Популярные бренды

Cisco NSS 300 Series, Руководство администратора

Результаты поиска

Содержание NSS 300 Series

Отзывы:

Похожие инструкции для NSS 300 Series

Бренды по названию

Популярные бренды