5-17
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
78-11069-03
Chapter 5
Getting Started with the DPA 7630/7610
Configuring SNMP Settings
Configuring Location
The location on the DPA 7630/7610 corresponds to the sysLocation variable
defined in RFC 1213.
To add the location of the DPA 7630/7610 in your network or on your site,
perform these steps:
Step 1
From the main menu, choose Configure.
Step 2
Choose SNMP.
Step 3
Choose Location.
Step 4
Enter the location of the DPA 7630/7610.
Configuring Trap Settings
You can configure the DPA 7630/7610 to notify a network management system
when certain significant system events occur. You can also specify the IP address
for the network management system that is acting as a trap receiver.
The DPA 7630/7610 supports the following traps:
•
Cold start trap—generated when the DPA 7630/7610 starts up and obtains an
IP address.
•
Warm start trap—generated if the IP address changes.
•
Authentication trap—generated when attempting to access the
DPA 7630/7610 using SNMP with an incorrect community string.
Enabling Authentication Traps
To enable authentication traps, perform these steps:
Step 1
From the main menu, choose Configure.
Step 2
Choose SNMP.
Содержание DPA 7610
Страница 4: ......
Страница 12: ...Contents xii Cisco DPA 7630 7610 Voice Mail Gateways Administration Guide 78 11069 03 ...