![background image](http://html.mh-extra.com/html/cisco/dpa-7610/dpa-7610_administration-manual_64877031.webp)
1-7
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
78-11069-03
Chapter 1
Overview
Understanding the DPA 7630/7610
•
GetBulk—Retrieve bounded number of values whose nodes succeed, in the
numerical ordering, the one specified. GetBulk is available only in SNMP v2.
•
Set—Set a specific value.
Understanding Supported MIBs
The DPA 7630/7610 supports the following MIBs:
•
RFC 1213, page 1-7
•
RMON, page 1-7
•
Cisco CDP MIB, page 1-8
•
Cisco Process MIB, page 1-8
•
Calista DPA MIB, page 1-8
RFC 1213
RFC 1213 is the basic MIB 2 specification which indicates the state of network
interfaces and statistics for network protocols.
The DPA 7630/7610 supports RFC 1213 on the Ethernet interface with the
following caveats:
•
The digital telephony interfaces are not listed in the ifTable.
•
ifAdminStatus cannot be written, and it is fixed at “up”.
•
ifLastChange returns as “0”.
•
ifSpecific returns as “0, 0”.
•
atTable cannot be written.
•
No “ip***” values can be written.
•
You cannot write to “tcpConnState” for an active TCP connection.
•
The DPA 7630/7610 does not implement the External Gateway Protocol
(EGP).
RMON
The DPA 7630/7610 implements the Ethernet Statistics group in Remote Network
Monitoring (RMON), with the exception of “EtherStatsStatus.” This is fixed at
“valid” and cannot be written.
Содержание DPA 7610
Страница 4: ......
Страница 12: ...Contents xii Cisco DPA 7630 7610 Voice Mail Gateways Administration Guide 78 11069 03 ...