6-11
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
78-11069-03
Chapter 6
Configuring Telephony Settings
Configuring Cisco CallManager Settings
Entering Cisco CallManager Pilot Directory Number
When Cisco CallManager is configured, one port on the DPA 7630/7610 serves
as the primary or “pilot” directory number for a voice mail hunt group. Typically,
you only need to specify this number if
•
You are using multiple DPA 7630/7610 systems in your network (multiple
integration mode).
•
Any voice mail hunt group spans multiple DPA 7630/7610 devices.
For example, DPA 7630/7610 A has extensions 1000-1010, and DPA 7630/7610
B has extensions 1011-1020. These extensions form one large voice mail hunt
group, with all the end-user phones forwarding to extension 1000.
You would not need to enter a pilot directory number for DPA 7630/7610 A
because extension 1000 is one of its own voice mail ports. However, you would
need to enter 1000 as the pilot directory number on DPA 7630/7610 B.
This pilot directory number should match the one defined in Cisco CallManager
(see the
“Setting Up the Voice Mail Hunt Group” section on page 4-5
).
To enter a pilot directory number, perform these steps:
Step 1
From the main menu, choose Configure.
Step 2
Choose CallManager.
Step 3
Choose CallManager “Pilot” directory number.
Step 4
Enter the directory number for the primary number in the voice mail hunt group.
You can enter multiple numbers separated by a comma.
Step 5
Restart the DPA 7630/7610.
Configuring Cisco Fax Relay
The DPA 7630/7610 supports Cisco fax relay. Cisco fax relay provides a more
reliable method of transporting fax data over the IP network rather than sending
the fax information as a voice call. However, the terminating device must also
support Cisco fax relay.
Содержание DPA 7610
Страница 4: ......
Страница 12: ...Contents xii Cisco DPA 7630 7610 Voice Mail Gateways Administration Guide 78 11069 03 ...
