![background image](http://html.mh-extra.com/html/cisco/dpa-7610/dpa-7610_administration-manual_64877104.webp)
Chapter 5
Getting Started with the DPA 7630/7610
Configuring Network Settings
5-12
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
78-11069-03
Assigning the NTP Server
If you choose to use an NTP server to synchronize the time settings on the
DPA 7630/7610 (see
“Identifying the Time Source for Event Logs” section on
page 5-10
), you must assign an NTP server and designate its time zone.
To set the NTP server, perform these steps:
Step 1
From the main menu, choose Configure.
Step 2
Choose Network interface.
Step 3
Choose NTP server.
Step 4
Enter the IP address of the NTP server.
Note
If you are using DHCP to obtain an IP address on the DPA 7630/7610, the
DHCP server should also indicate the NTP server.
Step 5
Restart the DPA 7630/7610.
Enabling CDP
The DPA 7630/7610 can advertise itself to other network devices using
Cisco Discovery Protocol (CDP). Many network management applications
require that CDP is enabled.
To enable CDP, perform these steps:
Step 1
From the main menu, choose Configure.
Step 2
Choose Network interface.
Step 3
Choose CDP.
Step 4
Press Enter to toggle between enabled and disabled.
Step 5
Restart the DPA 7630/7610.
Содержание DPA 7610
Страница 4: ......
Страница 12: ...Contents xii Cisco DPA 7630 7610 Voice Mail Gateways Administration Guide 78 11069 03 ...