Cisco DPA 7610, Руководство администратора

Страница: 107 / 188

5-15
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
78-11069-03
Chapter 5 Getting Started with the DPA 7630/7610
Configuring SNMP Settings
Step 3
Choose Enable password.
Step 4
Enter the new password.
Configuring SNMP Settings
The DPA 7630/7610 supports Simple Network Management Protocol (SNMP) by
supporting standard MIBs. Modify the SNMP settings as appropriate for your
network management needs. You need to configure the SNMP settings if you
want to manage the DPA 7630/7610 remotely.
Setting Community Strings
The community string settings enable network management systems to access the
DPA 7630/7610 for remote management.
You can configure a read-only password, which restricts access to the device,
allowing users to view information but not to make changes. You can also
configure a read-write community string, which allows users to make changes to
the device remotely.
You must assign community strings (“read-only” and “read-write”) to complete
the configuration process. By default, the “read-only” community string is set to
public, which provides read-only access. If you do not set these community
strings on the DPA 7630, you cannot manage the device remotely using the
Simple Network Management Protocol (SNMP).
To set the community strings, perform these steps:
Step 1
From the main menu, choose Configure.
Step 2
Choose SNMP.
Step 3
To set the read-only community string, choose Read-only community string.
Step 4
To set the read-write community string, choose Read-write community string.
Step 5
Enter the community string value.