Cisco DPA 7610, Руководство администратора

Страница: 92 / 188

Chapter 4 Preparing the Cisco CallManager and Octel Systems
Configuring the Octel Systems
4-16
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
78-11069-03
Assigning Incoming, Outgoing, and MWI Lines
On the Octel system, you must specify how each line is used, following these
guidelines:
•
When possible, separate the lines so that distinct lines are used for the three
types of call handling: incoming calls, outgoing calls, and MWI.
You can assign a single line to process outgoing calls and MWI commands.
However, you must not have a single line supporting both incoming call
processing and MWI commands.
•
Follow specific guidelines when physically connecting these lines to the
DPA 7630/7610 (see
“Connecting to the Telco Connectors” section on
page 3-10 ).
You have some flexibility in determining the number of lines used for each of
these tasks. For example, a company with a 144-port Octel voice mail system
using a DPA 7630 in hybrid integration mode might use the following
configuration:
•
Line A
–
8 ports for incoming calls
• Line B
–
2 ports for incoming calls
–
6 ports for MWIs
•
Line C
–
2 ports unused
–
6 ports for MWI pass through to PBX