12-11
Cisco Wireless LAN Controller Configuration Guide
OL-9141-03
Chapter 12 Configuring Hybrid REAPWireless Device Access
Configuring Hybrid REAP
e.
If you want to customize the content and appearance of the login page that guest users will see the
first time they access this WLAN, follow the instructions in
Chapter 5
.
f.
To add a local user to this WLAN, click
Security
and then click
Local Net Users
under AAA.
g.
When the Local Net Users page appears, click
New
. The Local Net Users > New page appears (see
Figure 12-6
).
Figure 12-6
Local Net Users > New Page
h.
In the User Name and Password fields, enter a username and password for the local user.
i.
In the Confirm Password field, re-enter the password.
j.
Check the
Guest User
check box to enable this local user account.
k.
In the Lifetime field, enter the amount of time (in seconds) for this user account to remain active.
l.
In the WLAN ID field, enter the number of the WLAN that will be accessed by the local user.
m.
In the Description field, enter a descriptive title for the local user (such as “Guest user”).
n.
Click
Apply
to commit your changes.
o.
Click
Save Configuration
to save your changes.
Step 4
Go to the
“Configuring an Access Point for Hybrid REAP” section on page 12-12
to configure two or
three access points for hybrid REAP.
