9-3
Cisco Wireless LAN Controller Configuration Guide
OL-9141-03
Chapter 9 Managing User Accounts
Creating Guest User Accounts
This page lists the names and access privileges of the local management users.
Note
You can click
Remove
to delete any of the user accounts from the controller. However, deleting
the default administrative user prohibits both GUI and CLI access to the controller. Therefore,
you must create a user with administrative privileges (ReadWrite) before you remove the default
user.
Step 2
To create a lobby ambassador account, click
New
under Management. The Local Management Users >
New page appears (see
Figure 9-2
).
Figure 9-2
Management > Local Management Users > New Page
Step 3
In the User Name field, enter a username for the lobby ambassador account.
Note
Management usernames must be unique because they are stored in a single database.
Step 4
In the Password and Confirm Password fields, enter a password for the lobby ambassador account.
Note
Passwords are case sensitive.
Step 5
Choose
LobbyAdmin
from the User Access Mode drop-down box. This option enables the lobby
ambassador to create guest user accounts.
Note
The
ReadOnly
option creates an account with read-only privileges, and the
ReadWrite
option
creates an administrative account with both read and write privileges.
Step 6
Click
Apply
to commit your changes. The new lobby ambassador account appears in the list of local
management users.
Step 7
Click
Save
Configuration
to save your changes.
