Problems on the Road
. . . 232
CAUTION
Check that the jumper cables
don’t have any loose or missing
insulation. If they do, you could
get a shock and the vehicles
could be damaged.
CAUTION
When connecting the cable,
make sure it is not near any
engine parts that will move.
Otherwise, you could be
injured or your vehicle could be
damaged.
4. Connect the positive (+) (red)
cable to the positive (+) termi-
nal on the charged battery.
Use the remote positive (+) ter-
minal if the vehicle has one.
5. Connect the other end of the
positive (+) (red) cable to the
positive (+) terminal on the
discharged battery.
6. Now take the negative (-)
(black) cable. First connect it
to the good battery's nega-
tive (-) terminal. Use the
remote negative (-) terminal if
the vehicle has one. Don't let
the other end touch metal yet.
CAUTION
Do not connect the negative (-)
cable to the negative (-) termi-
nal on the dead battery because
this can cause sparks.
The battery could even
explode.
Serious personal injury or vehi-
cle damage can result.
09Spark_GenR.fm Page 232 Monday, May 5, 2008 2:03 PM
233 . . .
–
–
–
–
–
Section
5
7. Attach the other end of the
negative cable to a heavy
metal part on the engine of
the vehicle with the dis-
charged battery, like a steel
bracket bolted to the engine
block.
Attach the cable at least 45 cm
(18 inches) away from the
dead battery, but not near en-
gine parts that move.
8. Start the vehicle with the
good battery. Run the engine
for a while.
9. Then try to start the other
vehicle.
If the engine does not start af-
ter a few tries, the vehicle may
need service.
NOTICE
Attempts to start the engine of
the vehicle with the discharged
battery should be made at
intervals of about one minute
and should not last longer than
15 seconds each.
10. Remove the cables in reverse
order to prevent electrical
shorting.
CAUTION
Damage to your vehicle may
result from electrical shorting if
jumper cables are removed
incorrectly. To prevent electri-
cal shorting, take care that the
cables do not touch each other
or any other metal.
11. Store the jumper cables in the
ment.
12. Run the engine at idle speed
for about 20 minutes to
recharge the battery.
09Spark_GenR.fm Page 233 Monday, May 5, 2008 2:03 PM
spare tyre storage compart-
Содержание Spark Lite
