Ceyear 4456 Series, Руководство пользователя

Страница: 152 / 267

Chapter XI Protocol Analyzer (Option)
142
Fig. 11.204 Display Setup Menu
Rotate the Multipurpose b to select the corresponding display, and then press it down to confirm Select, or directly
click the corresponding option of the Level3 Menu for direct settings;
Click [Number Format] key, and the Number Format Setup Level3 Menu will pop up:
Fig. 11.205 Number Format Setup Menu
Rotate the Multipurpose b to select the corresponding number format, and then press it down to confirm Select, or
directly click the corresponding option of the Level3 Menu for direct settings;
Click [Bus Offset] key, and then rotate the Multipurpose b to change the bus position in the vertical direction of
the display area;
Click [Waveforms Offset] key, and then rotate the Multipurpose b to change the waveform position in the vertical
direction of the display area;
Event table setup
Click [Event Table] key, and the Event Table setup menu will pop up on the right side of the screen:
Fig. 11.206 Event Table Setup Menu
Click [Event Table] key to close or open the event table;
Click [Save] key, and save the event table information.
Bus switch setting
Click [Bus Switch] key, and enable or disable the bus decoding function.
11.8.2 USB trigger setup
The USB bus can be triggered on sync active, reset, suspend, resume, end of packet, token packet, data packet,
handshake packet, special packet and error.
Press down
【
Trigger
】
key on the front panel to pop up the Trigger Level1 Menu; click [Type] key to pop up the
Trigger Level2 Menu, and click [Bus] key to pop up the USB Trigger Level1 Menu. Click [Trigger On] key, pop
up the Trigger Level2 Menu, and select the type.