Ceyear 4456 Series, Руководство пользователя

Страница: 136 / 267

Chapter XI Protocol Analyzer (Option)
126
When the "Cycle Count Trigger When" is set to Equal, No Equal, Less, Greater, No Less and No Greater, there
will be [Trigger When] and [Identifier] keys of the menu. When the "Trigger When" is set to Inside Range and
Outside Range, there will be [Trigger When], [Identifier Low] and [Identifier High] keys of the menu.
Click [Trigger When] menu key, and the Trigger When Setup Level3 Menu will pop up on the left side of the
screen:
Fig. 11.152 FlexRay Cycle Count Trigger When Setup Menu
Rotate the Multipurpose b to select the corresponding Trigger When, and then press it down to confirm Select, or
directly click the corresponding Trigger When setting on the screen.
Click [Cycle Count] menu key, and the Cycle Count setting numeric keypad will pop up on the left side of the
menu:
Fig. 11.153 Numeric Keypad
Set the cycle count through keys on the soft keyboard or Multipurpose a and Multipurpose b.
Click [Cycle Count Low] or [Cycle Count High] menu key, and the numeric keypad same as the [Cycle Count]
menu key setting as shown in the above figure will pop up on the left side of the menu, and the setting method is
the same.
Click [Data] menu key and set the FlexRay trigger type to Data, and the menu at the bottom of the screen will be
switched to the Data Trigger Type setup menu:
Fig. 11.154 FlexRay Data Trigger Level1 Menu
Click [Data] menu key, and the FlexRay Data setup menu will pop up on the right side of the screen: