Ceyear 4456 Series, Руководство пользователя

Страница: 81 / 267

Chapter X System Configuration
71
Chapter X System Configuration
This oscilloscope can be used for setting of Touch Panel, Print Mode, Reference & AUX OUT, Network, Optional
Module, etc., as well as calibration of channel, etc.
Press down
【
Utility
】
key on the front panel, and open the System Config menu:
Fig. 10.1 System Config Menu
10.1 Config
Click [Config] menu key, and open the Config menu:
Fig. 10.2 Config Menu
Touch Panel On/Off : Enable and disable the touch panel function. When the Touch Panel is turned on, the
waveform control can be realized by gesture.
Table 10.1 Description of Gestures
Gesture Control
Slide to the left The trigger point and waveform horizontally move to the left
Slide to the right The trigger point and waveform horizontally move to the right
Slide up The vertical zero point and waveform vertically move up
Slide down The vertical zero point and waveform vertically move down
Zoom in horizontally
by two fingers Zoom out the time base, and horizontally zoom in the waveform
Zoom out horizontally
by two fingers Zoom in the time base, and horizontally zoom out the waveform
Zoom in vertically by
two fingers Zoom out the vertical range, and vertically zoom in the waveform
Zoom out vertically
by two fingers Zoom in the vertical range, and vertically zoom out the waveform
Language : The Chinese and English operation interface can be selected.