Ceyear 4456 Series, Руководство пользователя

Страница: 58 / 267

Chapter VI Measurement System
48
Fig. 6.5 Source Option Menu
The corresponding Source can be selected by directly clicking the option or by pressing down the Multipurpose b.
Besides the open analog channels CH1

CH4, if the reference waveform and mathematical operation waveform
are switched on, or the histogram is switched on, the source can also select the reference waveform, mathematical
operation waveform or histogram waveform.
Measurement Type
Click [Type] menu key, and the Type option menu will pop up:
Fig. 6.6 Measurement Type Option Menu
The selected measurement type can be added by directly clicking the option or by pressing down the Multipurpose
b.
The analog channel waveform, reference waveform and mathematical operation waveform mainly include the
period, frequency, rise time, fall time, positive duty cycle, negative duty cycle, positive pulse width, negative
pulse width, amplitude, high level, low level, max., min., peak-to-peak, positive overshoot, negative overshoot,
pulse top fluctuation, average, average period value, root mean square, period root mean square, burst width,
positive pulse number, negative pulse number, rise edge number, fall edge number, area, period area, delay and
phase.
For histogram waveform, the oscilloscope will provide 12 measurement types, including the wave count, box hit
number, peak hit number, mid-value, peak-to-peak, max., min., average, standard difference, Sigma1, Sigma2 and
Sigma3.
When the measurement type is set to
“
Delay
”
, press down [Configure Delay] in the menu for the next delay
setting: