37
Quick Test
1. POWER: XXX%
2. RUN TIME: XX:XX min:sec
3. MAX TEMP: XXX C
4. MIN WT RANGE: X.XX g
5. MAX WT RANGE: 4.00 g
6. WT COMPENSATION: OFF
Press item number to select.
CONSTANT
WEIGHT
Note: Weight compensation is designed for use
with samples having a buoyancy effect created
by heat. It should be used (turned on) for
samples, such as milk, margarine, condiments,
etc., which have a higher temperature when the
final weight is calculated than at the beginning of
the test.
18.
Press “6” to toggle Weight Compenstaion
“on” or “off.”
Note: To edit any of the parameters, press the
numeric key of the parameter to be edited and
use the numeric keys to enter the new parameter.
Then, press ENTER.
19.
Press READY to begin the analysis.
Note: The Quick Test screen appears indicating
the power, temperature and time.
Note: Press the operation key below EDIT to
return to the Quick Test parameter screen to edit
method parameters.
20.
If Autotrack is turned off, a sample identifi-
cation name or number is required. Press
the operation key below ID.
21.
Using the operation keys below the arrows,
position the cursor on (select) the first
number or letter of the sample identifi-
cation. Press ENTER. Continue to position
the cursor on each letter or number and
press ENTER until the identification is
complete.
Note: If using an identification number only, use
the numeric keys to enter the number.
22.
Press READY to return to the Quick Test
screen.
Quick Test
1. POWER: XXX%
2. RUN TIME: XX:XX min:sec
3. MAX TEMP: XXX C
4. MIN WT RANGE: X.XX g
5. MAX WT RANGE: 4.00 g
6. WT COMPENSATION: OFF
Press READY to run test.
CONSTANT
WEIGHT
QUICK TEST
Power:
xxx%
Temp (xxx): xx.x
Time:
xx:xx
Wt: x.xxxxg
Place pads on balance and
press TARE.
ID
EDIT
SAMPLE ID:
0
1 2 3 4 5 6 7 8 9 A B
C D E F G H I J K L M N
O P Q R S T U V W X Y Z
Space
Delete
Highlight choice, press ENTER.
Press READY to continue.
➞
➞
➞
➞
1 2 3 4 5
➞