95
Data Results
XX.XX%M
Press READY to continue.
MAIN
FORM
MENU
FEED
DATA
When the drying time is complete, five short
beeps will be heard, and the Data Results screen
will appear, displaying either the % moisture or
% solids as selected.
27.
Press READY to redry sample or to
analyze additional samples.
28.
Lift the cover and remove the pads from
the balance pan.
29.
Fold the square pads in half and place them
in the extraction chamber of the Fat
Extraction System. Place the round pad
(smooth side up) in the recess at top of the
extraction chamber. Close and latch the lid.
WARNING
Failure to insert or properly position the
round filter pad in the recess at the top
of the extraction chamber could result
in operator exposure to solvent due to
leakage or possible spraying and/or
damage to the Fat Extraction System,
resulting from solid matter entering the
distillation system.
AVERTISSEMENT
L
’
installation incorrecte du filtre rond
(coussinet) situé sur la partie supérieure
de la chambre d
’
extraction peut exposer
l
’
opérateur à une possible fuite ou vapo-
risataion du solvent. De plus, le systeme
d
’
extraction des matières grasses peut
ètre endommagé résultant du passage
des matières solides dans le système de
distillation.
30.
Press the Run/Stop button on the extractor
to start the extraction cycle. When the
extraction is complete, a beep tone will
sound, and the light in the Run/Stop
button will flash. While the extractor
cup is still in the inverted position,
unlatch the lid and remove the round
sample pad on which the chopped
square pads and extracted and dried
sample have been deposited. Latch the
cup lid. The extractor cup will
automatically rotate 180 degrees to the
upright position.