manualshive.com logo in svg

CEM SMART System 5, Руководство по эксплуатации, Страница: 146 / 163

Поделиться
Скачать
CEM SMART System 5 Скачать руководство пользователя страница 146

139

External Printer

The SMART System

5

 

supports a variety of different external printer standards –

•

IBM

•

Epson

•

Citizens

•

HP Laserjet

•

Canon Bubble

•

Epson Color 740 - Available from CEM Corporation and requires no setup.

To install the Epson Color 740, follow the procedures outlined below. Refer to the
manual shipped with the printer for illustrations and explanation of the
terminology used.

1.

Press the power switch of the SMART System

5

 to the “off” position.

2.

Remove the printer and its accessories from the shipping carton. Place the
printer on a vibration-free printer stand or a solid, sturdy laboratory
workbench or table. Save all packing materials.

3.

Plug one connector of the cord shipped with the printer into the socket on the
printer. Plug the other connector into the parallel port of the SMART
System

5

. Plug the printer power cord into a grounded AC electrical outlet.

4.

Press the power switch of the printer to the “on” position.

5.

Press the power switch of the SMART System

5

 

to the “on” position.

6.

Refer to the SETUP section of this manual for instructions for selection of an
external printer within the system software.

External Balance

1.

Press the power switch of the SMART System

5

 to the “off” position.

2.

Place the external balance on a vibration-free sturdy laboratory workbench or
table.

3.

Plug one connector of the cord shipped with the external balance into the
socket on the balance and the other connector into the external balance port
of the SMART System

5

. Plug the balance power cord into a grounded AC

electrical outlet.

4.

Based on the type of external balance used, refer to the manufacturer’s
manual and/or CEM Corporation instructions for specific procedures for
setup and configuration of the balance and instrument.

Содержание SMART System 5




































































































































































Отзывы:

Нет отзывов