Carrier Access Access Navigator, Руководство пользователя

Страница: 562 / 704

18-106 August 2003 Access Navigator - Release 1.8
CLI Language Reference
CLI Command List
Syntax:
set ds0 < n : ch > type < data | voice | gr303 >
Example:
set ds0 2:3 type data
Example:
set ds0 2:12 type voice
Example:
set ds0 13:1-16 type gr303
Set DS1 Clock
Purpose:
Sets the transmit clock source for the specified DS1 interface.
Security:
Level 2 (operator)
Syntax:
set ds1 < n > clock < normal | loop >
Example:
set ds1 9 clock normal
Example:
set ds1 1-12 clock normal
Example:
set ds1 9 clock loop
Set DS1 FDL
Purpose:
Selects the FDL protocol used on drop DS1s. Switch and groom DS1s do not use FDL.
The Facility Data Link (FDL) channel is a 4 Kbps out-of-band communications link
provided by the DS1 Extended Superframe (ESF) format.
NOTE:
The factory default setting is “none”. This also turns off out-of-band
loopback code detection and transmission over the FDL channel.
Field Description
n DS1 number, 1 to 32.
ch DS0 number, 1 to 24, or a range of numbers such as 5-8.
data Set DS0 to carry DCS data traffic.
voice Set DS0 to carry DCS voice traffic.
gr303 Enable DS0 to carry GR-303 voice traffic. (ISDN BRI 4:1 TDM
mode circuits are automatically assigned as gr303 type.)
Field Description
n DS1 number, 1 to 32, or a range of numbers such as 2-8.
normal Set to master transmit clock source.
loop Set clocking for this DS1 to clock recovered by DS1 receiver.
(Should not be used during normal operation.)