Canon imagePROGRAF iPF8300S, Руководство пользователя

Страница: 1033 / 1172

Use this mode if printing is faint or contains foreign substances. This method of cleaning consumes the least amount of
ink.
It takes about four minutes to complete.
• Head Cleaning B
Use this mode if no ink is ejected at all, or if Head Cleaning A does not solve the problem.
It takes about five minutes to complete.
Important
• Do not remove the Maintenance Cartridge or ink tanks during either Head Cleaning A or Head Cleaning B .
Ink may leak or an error may occur.
• If printing does not improve even if you execute Head Cleaning B , try repeating Head Cleaning B once or
twice. If this still does not improve printing, the Printhead may have reached the end of its useful life. Con-
tact your Canon dealer for assistance.
Note
• Nozzles are periodically checked to ensure they are clear. Configure the settings on the Control Panel menu
in
Nozzle Check .
(See "
Menu Settings
.")
→P.938
Perform cleaning as follows.
1.
On the Tab Selection screen of the Control Panel, press
◀
or
▶
to select the Settings/Adj. tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2.
Press the OK button.
The Set./Adj. Menu is displayed.
3.
Press ▲ or ▼ to select Maintenance , and then press the OK button.
4.
Press ▲ or ▼ to select Head Cleaning , and then press the OK button.
5.
Press ▲ or ▼ to select Head Cleaning A or Head Cleaning B , and then press the OK button.
Head cleaning is now executed.
6.
Print a test pattern to check the nozzles, and determine whether cleaning has cleared the nozzles. (See " Checking
for Nozzle Clogging .")
→P.1011
Replacing the Printhead
When to replace the Printhead
This printer is equipped with two printheads.
Maintenance and Consumables > Printheads >
iPF8300S Replacing the Printhead
11
1013