Canon imagePROGRAF iPF8300S, Руководство пользователя

Страница: 1125 / 1172

Rewinding error.
Cause Corrective Action
There is some foreign object near the Media Take-up Unit sensor
and the roll cannot be detected. Remove the foreign object near the sensor.
The Media Take-up Unit sensor is soiled and the roll cannot be de-
tected. Wipe the sensor with a dry cloth to clean it.
The roll is out of range of detection by the Media Take-up Unit sen-
sor. Reload the roll.
(See " Loading Rolls in the Printer .")
→P.786
A paper jam has occurred and the roll cannot be rewound. Remove the paper from the Media Take-up Unit.
Press the
OK button to clear the error.
The Media Take-up Unit sensor is damaged. Contact your Canon dealer for assistance.
*1: Printing will stop momentarily if an error involving the Media Take-up Unit occurs. If you prefer printing not to
stop, set Skip Take-Up Err to On . However, note that this error may cause paper jams and affect the printing
quality.
Media take-up unit ready.
Cause Corrective Action
The Take-up Reel setting in the printer Set./Adj.
Menu was changed from Enable to Disable , but a
print job was received before the roll was re-
moved.
Press ▲ or ▼ to select Stop Printing , and then press the OK
button to stop printing.
The mode switches from take-up mode to regular mode after you
change the
Take-up Reel setting in the Set./Adj. Menu from En-
able to Disable and lift the Release Lever to remove a roll, or af-
ter you execute Paper Cutting .
Press ▲ or ▼ to select Print , and then press the OK button to
resume printing.
Turn on the media take-up unit.
Cause Corrective Action
The Media Take-up Unit was off when you selected Enable for Take-up Reel . Turn the Media Take-up Unit on.
Borderless printng not possible.
Cause Corrective Action
The print job received specifies a
type or width of paper that is not
compatible with borderless print-
ing. Follow these steps to change the settings of the print job to enable borderless print-
ing.
1.
Press ▲ or ▼ to select Stop Printing , and then press the OK button.
2.
Make sure the correct printer driver for the printer is selected and try printing
again.
For information on types of paper compatible with borderless printing, refer to
the Paper Reference Guide.
(See
Paper Reference Guide .)
Error Message > Messages regarding paper >
iPF8300S Rewinding error.
13
1105