Cabletron Systems ATX, Справочное руководство

Страница: 95 / 252

Transparent Group
ATX MIB Reference Guide 6-13
dot1dTpFdbPort {dot1dTpFdbEntry 2}
Integer Read-Only
Either the value 0, or the port number of the port on which a frame having a
source address equal to the value of the corresponding instance of
dot1dTpFdbAddress has been seen. A value of 0 indicates that the port number
has not been learned but that the bridge does have some forwarding/filtering
information about this address (e.g., in the dot1dStaticTable). Implementors are
encouraged to assign the port value to this object whenever it is learned even for
addresses for which the corresponding value of dot1dTpFdbStatus is not learned
(3).
dot1dTpFdbStatus {dot1dTpFdbEntry 3}
Integer Read-Only
The status of this entry. The meanings of the values are other (1) none of the
following. This would include the case where some other MIB object (not the
corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable)
is being used to determine if and how frames addressed to the value of the
corresponding instance of dot1dTpFdbAddress are being forwarded. invalid (2)
this entry is not longer valid (e.g., it was learned but has since aged-out), but has
not yet been flushed from the table. learned (3) the value of the corresponding
instance of dot1dTpFdbPort was learned, and is being used. self (4) the value of
the corresponding instance of dot1dTpFdbAddress represents one of the bridge’s
addresses. The corresponding instance of dot1dTpFdbPort indicates which of the
bridge’s ports has this address. mgmt (5) the value of the corresponding instance
of dot1dTpFdbAddress is also the value of an existing instance of
dot1dStaticAddress.
dot1dTpPortTable {dot1dTp 4}
Not-Accessible
A table that contains information about every port that is associated with this
transparent bridge.
Only those ports that are enabled for transparent (or source routing transparent)
bridging appear in this table. Refer to Cabletron’s enterprise-specific MIB
sprotoBridge parameter for the means to enable/disable transparent bridging on a
per-port basis.
dot1dTpPortEntry {dot1dTpPortTable 1}
Not-Accessible
A list of information for each port of a transparent bridge.