manualshive.com logo in svg

Cabletron Systems ATX, Справочное руководство, Страница: 72 / 252

Поделиться
Скачать
Cabletron Systems ATX Скачать руководство пользователя страница 72

Chapter 5: FDDI MIB

5-10

ATX MIB Reference Guide

fddimibMACFrameCts

{fddimibMACEntry 21}

Counter Read-Write*

A count of the number of frames received by this MAC (corresponds to ANSI 
{fddiMAC 71}, refer to ANSI MAC 7.5.1). Any attempt to write this parameter 
will cause the MAC’s Frame_Ct, Copied_Ct, Transmit_Ct, Error_Ct, and 
Lost_Ct to be zeroed.

fddimibMACCopiedCts {fddimibMACEntry 

22}

Counter Read-Write*

A count that should as closely as possible match the number of frames addressed 
to a bit set and successfully copied into the station’s receive buffers (C bit set) by 
the MAC (corresponds to ANSI {fddiMAC 72}, refer to ANSI MAC 7.5). Note 
that this count does not include MAC frames. Any attempt to write this parameter 
will cause the MAC’s Frame_Ct, Copied_Ct, Transmit_Ct, Error_Ct, and 
Lost_CT to be zeroed.

fddimibMACTransmitCts {fddimibMACEntry 

23}

Counter Read-Write*

A count that should as closely as possible match the number of frames 
transmitted by this MAC (corresponds to ANSI {fddiMAC 73}, refer to ANSI 
MAC 7.5). Note that this count does not include MAC frames. Any attempt to 
write this parameter will cause the MAC’s Frame_Ct, Copied_Ct, Transmit_Ct, 
Error_Ct, and Lost_CT to be zeroed.

fddimibMACErrorCts

{fddimibMACEntry 24}

Counter Read-Write*

A count of the number of frames that were detected in error by this MAC that had 
not been detected in error by another MAC (corresponds to ANSI 
{fddiMAC 81}, refer to ANSI MAC 7.5.2). Note that this count does not include 
MAC frames. Any attempt to write this parameter will cause the MAC’s 
Frame_Ct, Copied_Ct, Transmit_Ct, Error_Ct, and Lost_CT to be zeroed.

fddimibMACLostCts {fddimibMACEntry 

25}

Counter Read-Write*

A count of the number of instances that this MAC detected a format error during 
frame reception such that the frame was stripped (corresponds to ANSI 
{fddiMAC 82}, refer to ANSI MAC 7.5.3). Any attempt to write this parameter 
will cause the MAC’s Frame_Ct, Copied_Ct, Transmit_Ct, Error_Ct, and 
Lost_CT to be zeroed.

Содержание ATX





























































































































































































































































Отзывы:

Нет отзывов