manualshive.com logo in svg

Cabletron Systems ATX, Справочное руководство, Страница: 117 / 252

Поделиться
Скачать
Cabletron Systems ATX Скачать руководство пользователя страница 117

PPP Link Control Table

ATX MIB Reference Guide

8-5

pppLinkConfigEntry {pppLinkConfigTable 

1}

Not-Accessible

Configuration information about a particular PPP Link.

pppLinkConfigInitialMRU

{pppLinkConfigEntry 1}

Integer Read-Write

The initial Maximum Receive Unit (MRU) that the local PPP entity will advertise 
to the remote entity. If the value of this variable is 0 then the local PPP entity will 
not advertise any MRU to the remote entity and the default MRU will be 
assumed. Changes to this object take effect when the link is next restarted. 

Currently, only 8192 is supported and read-only access.

pppLinkConfigReceiveACCMap

{pppLinkConfigEntry 2}

Octet String Read-Write

The Asynchronous Control Character Map (ACC) that the local PPP entity 
requires for use on its receive side. In effect, this is the ACC Map that is required 
in order to ensure that the local modem will successfully receive all characters. 
The actual ACC map used on the receive side of the link will be a combination of 
the local node’s pppLinkConfigReceiveACCMap and the remote node’s 
pppLinkConfigTransmitACCMap. Changes to this object take effect when the 
link is next restarted. The only value supported is (0) no ACC map.

pppLinkConfigTransmitACCMap

{pppLinkConfigEntry 3}

Octet String Read-Write

The Asynchronous Control Character Map (ACC) that the local PPP entity 
requires for use on its transmit side. In effect, this is the ACC Map that is required 
in order to ensure that all characters can be successfully transmitted through the 
local modem. The actual ACC map used on the transmit side of the link will be a 
combination of the local node’s pppLinkConfigTransmitACCMap and the remote 
node’s pppLinkConfigReceiveACCMap. Changes to this object take effect when 
the link is next restarted. The only value supported is (0) no ACC map.

Содержание ATX





























































































































































































































































Отзывы:

Нет отзывов