manualshive.com logo in svg

Cabletron Systems ATX, Справочное руководство, Страница: 122 / 252

Поделиться
Скачать
Cabletron Systems ATX Скачать руководство пользователя страница 122

Chapter 8: PPP MIB

8-10

ATX MIB Reference Guide

pppIpRemoteMaxSlotId

{pppIpEntry 4}

Integer Read-only

The Max-Slot-Id parameter that the remote node has advertised and that is in use 
on the link. If vj-tcp header compression is not in use on the link then the value of 
this object shall be 0. The value of this object is meaningful only when the link 
has reached the open state (pppIpOperStatus is opened). 

pppIpLocalMaxSlotId

{pppIpEntry 5}

Integer Read-only

The Max-Slot-Id parameter that the local node has advertised and that is in use on 
the link. If vj-tcp header compression is not in use on the link then the value of 
this object shall be 0. The value of this object is meaningful only when the link 
has reached the open state (pppIpOperStatus is opened). 

pppIpConfigTable

{pppIp 2}

Not-Accessible

Table containing configuration variables for the IPCP for the local PPP entity.

pppIpConfigEntry

{pppIpConfigTable 1}

Not-Accessible

IPCP information for a particular PPP link.

pppIpConfigAdminStatus

{pppIpConfigEntry 1}

Integer Read-Write

The immediate desired status of the IP network protocol. Setting this object to 
open (1) will inject an administrative open event into the IP network protocol’s 
finite state machine. Setting this object to close (2) will inject an administrative 
close event into the IP network protocol’s finite state machine. The ATX only 
supports Open (1).

pppIpConfigCompression

{pppIpConfigEntry 2}

Integer Read-Write

If none (1), then the local node will not attempt to negotiate any IP Compression 
option. Otherwise, the local node will attempt to negotiate compression mode 
indicated by the enumerated value. Changes to this object take effect when the 
link is next restarted. The other option Van-Jacobsen TCP/IP header compression 
(2), is not supported on the ATX.

Содержание ATX





























































































































































































































































Отзывы:

Нет отзывов