manualshive.com logo in svg

Cabletron Systems ATX, Справочное руководство, Страница: 153 / 252

Поделиться
Скачать
Cabletron Systems ATX Скачать руководство пользователя страница 153

ATX Group

ATX MIB Reference Guide

10-13

10.3.2

Software Configuration Group

sw

{ecs-1 2}

This attribute group supplies information which describes the software 
configuration of this particular ATX. 

swNumber

{sw 1}

Integer Read-Only 

The number of file sets. This number is fixed as 2. 

swFilesetTable

{sw 2}

Not-Accessible 

A list of the software file sets stored in the ATX. The first file set refers to the file 
set that was used when the ATX last booted. The second file set refers to the file 
set that will be used when the ATX reboots or reloads any hardware module. 
[Since IOM hardware modules may be re-started after the unit has booted, the 
software which is executing on an IOM may be different than the software that 
was used when the unit booted.].

swFileset

{swFilesetTable 1}

Not-Accessible 

A set of objects for each file set. The individual components are described below. 

swIndex

{swFileset 1}

Integer Read-Only 

The file set number, beginning with 1 for the first file set. This number always 
matches the instance of the swFiles. For example, {swIndex 2} contains the value 
“2”. 

swValid

{swFileset 2}

Obsolete

swDesc

{swFileset 3}

Octet String Read-Only 

The description (0-32 bytes) of the software file set. 

swCount

{swFileset 4}

Integer Read-Only 

The number of files in the file set. This number may range from 1 to 255. 

Содержание ATX





























































































































































































































































Отзывы:

Нет отзывов