manualshive.com logo in svg

Cabletron Systems ATX, Справочное руководство, Страница: 24 / 252

Поделиться
Скачать
Cabletron Systems ATX Скачать руководство пользователя страница 24

Chapter 2: TCP/IP MIB-II

2-2

ATX MIB Reference Guide

HT

the name TURBO followed by 24 characters which are all blanks. If 
the board is removable, then the 24 characters contain a part number 
and serial number. If the board is revocable and has been removed, 
then the name is NONE followed by 25 blanks.

Hn

the name of each IOM followed by a 24 character manufacturing code 
(which contains a part number and serial number). Each IOM name is 
padded with blanks, if necessary, so that it is 5 characters. The IOM 
names are the following.

CEIOM

Ethernet or 802.3 (i.e., 10 megabit CSMA/CD) module with a built-in 
concentrator

EIOM

Ethernet or 802.3 module

FIOM FDDI 

module

HIOM

HSSI module

IFIOM

Intelligent FDDI module

NONE

no module (the manufacturing code is all blanks)

TIOM

Token Ring (i.e., 802.5) module

QEIOM

Quad Ethernet module, i.e., an Ethernet module with 4 ports

QTIOM

Quad Token Ring module, i.e., a Token Ring module with 4 ports

sysObjectID

{system 2}

Object Identifier Read-Only 

The identifier of the variable used to identify the type of entity. Cabletron’s MIB 
sysID parameter will have a value that indicates that it is a hub/bridge/router. So 
sysObjectID contains the object identifier of the Cabletron MIB sysID object, 
i.e., 
{1 3 6 1 4 1 97 1 1}. 

sysUpTime

{system 3}

TimeTicks Read-Only 

The time, in centiseconds, since the unit was last booted. 

sysContact

{system 4}

DisplayString Read-Write 

The name and address of the contact person for the unit. The first 24 characters of 
sysContact are copied as the UserData information for FDDI SMT frames.

Содержание ATX





























































































































































































































































Отзывы:

Нет отзывов