manualshive.com logo in svg

Cabletron Systems ATX, Справочное руководство, Страница: 33 / 252

Поделиться
Скачать
Cabletron Systems ATX Скачать руководство пользователя страница 33

IP Group

ATX MIB Reference Guide

2-11

ipReasmOKs

{ip 15}

Counter Read-Only 

The number of IP datagrams which were successfully reassembled. 

ipReasmFails

{ip 16}

Counter Read-Only 

The number of failures (for whatever reason timed-out, errors, etc.) detected by 
the IP reassembly algorithm. This is not necessarily a count of discarded IP 
fragments since some algorithms (notably RFC 815’s) can lose track of the 
number of fragments by combining them as they are received. 

ipFragOKs

{ip 17}

Counter Read-Only 

The number of IP datagrams that have been successfully fragmented within this 
unit. 

ipFragFails

{ip 18}

Counter Read-Only 

The number of IP datagrams that have been discarded because they needed to be 
fragmented but could not be (e.g. because their “Don’t Fragment” flag was set). 

ipFragCreates

{ip 19}

Counter Read-Only 

The number of IP datagram fragments that have been generated by this unit. 

2.4.1 IP Address Table

The TCP/IP IP Address Table contains the IP addressing information for each 
port. The parameters are described below. 

ipAddrTable

{ip 20}

Not-Accessible 

A list of IP address entries; one per IP address. If a port has not yet learned its IP 
address, then an ipAddrEntry might not exist for the port (i.e., having an 
ipAddrEntry with an IP address of zero is not acceptable). 

ipAddrEntry

{ipAddrTable 1}

Not-Accessible 

A set of objects for an ipAddrTable entry. The individual components are 
described below. 

Содержание ATX





























































































































































































































































Отзывы:

Нет отзывов