manualshive.com logo in svg

Cabletron Systems ATX, Справочное руководство, Страница: 151 / 252

Поделиться
Скачать
Cabletron Systems ATX Скачать руководство пользователя страница 151

ATX Group

ATX MIB Reference Guide

10-11

hwFirstPort

{hwEntry 18}

Integer Read-Only

The IfIndex number of the first port which resides within this module.

hwFatalErr

{hwEntry 19}

Octet String Read-Only

A 32 byte array which contains information about the cause of the module’s last 
unexpected self-reset, since the unit rebooted. For the Packet Processing Engine 
and Turbo, this will always be all zeroes, since failure of such a module will 
cause the unit to reboot. For the other modules, this field either contains all 
zeroes (if the module has not self-reset), or it contains values according to the 
format of configFatalErr, with a first byte of either “Watchdog Timeout” (1) or 
“Fatal Error” (3).

hwRptrPorts

{hwEntry 20}

Octet String Read-Only

A 4 byte array, where each element represents the repeater capability of the port 
belonging to this module. The element value is zero if the port is not present or 
does not have any repeater capability; otherwise, the value indicates the number 
of repeater ports at that port (see rptrBasGroupNumOfPorts).

hwPortSubType

{hwEntry 21}

Octet String Read-Only

A 4 byte array, where each element represents additional port type information. 
The following values have been defined:

0x01

CSMA/CD AUI

0x02

CSMA/CD TP repeater with 6 TP ports; limited repeater 

management is available (not currently available as a product)

0x03

CSMA/CD TP repeater with 6 TP ports, full repeater 

management is available (not currently available as a product)

0x04

CSMA/CD TP with 12 TP ports; full repeater management is 

available (not currently available as a product)

0x05

CSMA/CD TP with 12 TP and 1AUI port; full repeater 

management is available (not currently available as a product)

0x06

CSMA/CD TP with 24 TP ports; full repeater management is 

available

0x07

CSMA/CD TP with 24 TP and 1AUI; full repeater management 

is available (not currently available as a product)

Содержание ATX





























































































































































































































































Отзывы:

Нет отзывов