manualshive.com logo in svg

Cabletron Systems ATX, Справочное руководство, Страница: 125 / 252

Поделиться
Скачать
Cabletron Systems ATX Скачать руководство пользователя страница 125

PPP Bridge Support

ATX MIB Reference Guide

8-13

pppBridgeConfigRingId

{pppBridgeConfigEntry 3}

Integer Read-Write

If false (1) then the local PPP Entity will not initiate a Remote Ring Identification 
Option negotiation and if true (2) it will. This MIB object is relevant only if the 
interface is for 802.5 Token Ring bridging.

pppBridgeConfigLineId

{pppBridgeConfigEntry 4}

Integer Read-Write

If false (1) the local PPP Entity won’t initiate a Line Identification Option 
negotiation and if true (2) it will. This MIB object is relevant only if the interface 
is for 802.5 Token Ring bridging.

pppBridgeConfigLanId

{pppBridgeConfigEntry 5}

Integer Read-Write

If false (1) the local BNCP entity will not initiate the LAN Identification Option 
Negotiation and if true (2) it will.

pppBridgeMediaTable

{pppBridge 3}

Not-Accessible

Table identifying which MAC media types are enabled for the Bridging NCPs.

pppBridgeMediaEntry

{pppBridgeMediaTable 1}

Not-Accessible

Status of a specific MAC Type for a specific PPP Link.

pppBridgeMediaMacType

{pppBridgeMediaEntry 1}

Integer Read-Only

The MAC type for which this entry in the pppBridgeMediaTable is providing 
status information. Valid values for this object are defined in Section 6.6 MAC 
Type Support Selection of RFC1220 (Bridging Point-to-Point Protocol).

The unit only supports a MAC type of FDDI (4).

pppBridgeMediaLocalStatus

{pppBridgeMediaEntry 2}

Integer Read-Only

Indicates whether the local PPP Bridging Entity will accept (1) packets of the 
protocol type identified in pppBridgeMediaMacType on the PPP link identified 
by ifIndex or not. If this object is accept then any packets or the indicated MAC 
type will be received and properly process. If this object is don’t accept (2) then 
received packets of the indicated MAC type will not be properly processed.

Содержание ATX





























































































































































































































































Отзывы:

Нет отзывов