Cabletron Systems ATX, Справочное руководство

Страница: 246 / 252

Chapter 11: Traps
11-4 ATX MIB Reference Guide
• rptrBasHealthState – Sent whenever the operational state of the repeater has
changed.
• hwDiagStatus – Sent whenever a module’s diagnostics have completed (or a
module’s diagnostics were started but never completed), except for the initial
diagnostics when the unit booted. The following parameters are also included,
if the module’s diagnostics have completed.
- hwDiagCode
- hwManufData
- hwType – (only sent if the module passed diagnostics, and the module’s
type did not match hwDefType)
- hwPortType – (only sent if the module passed diagnostics, and the port
types of the module did not match hwDefPortType)
- hwPortStatus – (only sent if the module passed diagnostics, and one or
more of the module’s ports failed diagnostics)
• hwDiagCode – Sent in conjunction with hwDiagStatus; hwDiagCode does
not need to be acknowledged.
• hwManufData – Sent in conjunction with hwDiagStatus or hwTempOK;
hwManufData does not need to be acknowledged.
• hwType – Sent in conjunction with hwDiagStatus; hwType does not need to
be acknowledged.
• hwPortType – Sent in conjunction with hwDiagStatus; hwPortType does not
need to be acknowledged.
• hwPortStatus – Sent in conjunction with hwDiagStatus; hwPortStatus does
not need to be acknowledged.
• hwTempOK – Sent whenever the module’s temperature transitions from too
hot to okay, and vice versa. The following parameters are also included:
- hwManufData
• hwFatalErr – Sent whenever a module dies unexpectedly. Since death of the
ME or TURBO causes the unit to reboot, an hwFatalErr alarm for such a
module will never occur.
• configPowerAc1 – Sent whenever the AC input to the unit’s first power supply
transitions from on to off, and vice versa.
• configPowerAc2 – Sent whenever the AC input to the unit’s second power
supply transitions from on to off, and vice versa.