Cabletron Systems ATX, Справочное руководство, Страница: 131 / 252

ATPort Group
ATX MIB Reference Guide 9-5
atportType {atportEntry 3}
Integer Read-Write
The type of port, distinguished by the protocol immediately below DDP in the
protocol stack.
atportNetStart {atportEntry 4}
Octet String Read-Write
The first AppleTalk network address in the range configured for this port. This is
a two octet DDP network address in network byte order.
atportNetEnd {atportEntry 5}
Octet String Read-Write
The last AppleTalk network address in the range configured for this port. This is a
two octet DDP network address in network byte order. If the network to which
this AppleTalk port is connected is a Phase 1 network or a non-extended network,
the value for atportNetEnd shall be two octets of zero.
atportNetAddress {atportEntry 6}
Octet String Read-Write
The AppleTalk network address configured for this port.
atportStatus {atportEntry 7}
Integer Read-Write
The configuration status of this port. Setting this object to the value invalid (4)
has the effect of invalidating the corresponding entry in the atportTable. That is, it
effectively disassociates the mapping identified with said entry. It is an
implementation-specific matter as to whether the agent removes an invalidated
entry from the table. Accordingly, management stations must be prepared to
receive from agents tabular information corresponding to entries not currently in
use. Proper interpretation of such entries requires examination of the relevant
atportStatus object.
The values for atportStatus include:
• operational (1)
• unconfigured (2)
• off (3)
• invalid (4)