Burk GSC3000, Руководство по установке и эксплуатации

Страница: 80 / 149

Channels
Up to ten channels may be included in any graph. The more channels
you use, the “busier” the chart will be. Keep in mind that the channels
will share the same Y-axis.
Configure each channel separately by clicking on a channel tab on the
left side of the Channels page. Start with the tab marked 1 and
continue in order until you have entered all the channels you want to
appear on this chart.
A Au utto om ma attiicca alllly y S Se ett tth he e LLa ab be ell.. Check the Automatically Set Label box to
use the channel label set up during unit configuration.
LLa ab be ell.. If you want the channel label to be different from the label set up
during unit configuration, enter that label here.
S Siitte e//U Un niitt.. Choose the site and unit where the desired channel is located.
C Ch ha an nn ne ell.. Select the desired channel.
LLiin ne e C Co ollo orr.. Using automatic line color selection will assign unique colors to each channel you insert into the
graph. You can also set your own by choosing from the drop-down list.
LLiin ne e S Stty ylle e.. Select the desired line style from the drop-down list. This is the chart line representing the actual
channel reading.
LLiin ne e W Wiid dtth h.. This sets the line width (in pixels) for this channel’s line.
Editing Chart Settings
Editing your chart settings is very similar to setting them up for the first time. From the View List, click the Charts
separator, and right-click the chart you want to edit. Click Edit Chart, and then change the desired chart settings
using the Chart Properties window.
Saving Your Chart
When you are done creating or editing your chart, click OK in th e Chart Properties window. The chart will
update to reflect your new settings. Click the Save icon in the Lynx Chart toolbar to save your chart.
GSC3000 & VRC2500 INSTALLATION & OPERATION MANUAL
CHAPTER 7: SITE DATA & REPORTS
72