Burk GSC3000, Руководство по установке и эксплуатации

Страница: 98 / 149

LYNX USERS & PASSWORDS
In addition to password protection for the remote control units, there are user
names and passwords used to access the Lynx application itself. A user with
System privileges may create users and edit passwords and privileges for all
profiles, while Operators and Observers may only update their own passwords.
To create or modify user profiles (available to System users only):
1. From the File menu, select Users. The Users window will appear, showing you a table of all user names and
their corresponding privileges and passwords.
2. To set up a new user, click New User and Lynx will generate a new user profile with a default user name,
Observer privileges and a blank password.
3. To change the user name, privilege level or password for any user, click in the field you would like to
modify and make the desired changes.
Note: System users have full access to all program functions, and Operators may: issue commands, run macros, clear
alarms, take captures, set site time, insert log messages, enable/disable logging, and edit Lynx options. Observer
users may only log in, connect to sites and view metering and status data.
You can create a user with Custom privileges by selecting Custom in the Access Level field and choosing
which functions will be available to this user.
4. Click Save to keep the changes, or Undo Changes to restore original settings. When you are done, click
Close to exit the Users window.
Note: To delete a user, click any field in the user’s profile and select Delete User.
To change your own user password (available to all users):
1. Log in to Lynx and select Change User Login Password from the File menu.
2. Enter your current password, then your new password, and confirm your new password.
3. Click OK.
GSC3000 & VRC2500 INSTALLATION & OPERATION MANUAL
CHAPTER 9: SOUNDS, OPTIONS & PASSWORDS
90