Bull Novascale Blade BL465, Инструкция по установке и эксплуатации, Страница: 94 / 128

80
novascale Blade BL465 - Installation and User's Guide
3. Update the UEFI firmware on the primary blade server. Then update the UEFI firmware
on the secondary blade server.
4. Update the FPGA firmware on the primary blade server. Then update the FPGA
firmware on the secondary blade server.
5. Update the DSA preboot firmware on the primary blade server. Then update the DSA
Preboot firmware on the secondary blade server.
6. Restart both blade servers to activate the firmware.
You can also use an Expect type script to automate advanced management module
command-line interface (CLI) commands for updating the firmware for both blade
servers.
Complete the following steps to use an Expect type script:
1. Download the firmware from http://support.bull.com. Place the files on a TFTP server
that is on the same TCP/IP subnet as the advanced management module for the
chassis in which the BL465 is installed.
Note Remember to record the directory location on the TFTP server where you place the
files; you will need that location to run the Expect type script.
2. Generate an Expect type script that will log in to the advanced management module
CLI, update the firmware for the BL465, and restart the BL465 when complete.
3. From a computer that is on the same TCP/IP subnet as the advanced management
module for the chassis in which the BL465 complex is installed, run the Expect type
script.
Example of an Expect script
The following script illustrates how an Expect type script might be created to update the
firmware for both blade servers.
Important: Bull does not provide support for Expect scripts. For more information about
using Expect, see the Expect website at http://expect.sourceforge.net/. For more
information about using the advanced management module CLI, see the Bull Blade Chassis
Advanced Management Module Command-Line Interface Reference Guide at
http://support.bull.com
#!/usr/bin/expect
################################################################################
# #
# This tool has been built from the following sources: #
# #
# support/FlashMNBladeViaAmm.exp : 1.1 #
# support/include/Log.exp : 1.9 #
# support/include/AMM.exp : 1.29 #
# support/include/MultiNode.exp : 1.1 #
# support/include/FlashBlade.exp : 1.16 #
# #
################################################################################
################################################################################
# #
# Code from source : support/include/Log.exp #
# #