Bull Novascale Blade BL465, Инструкция по установке и эксплуатации, Страница: 63 / 128

Chapter 3. Installing Options
49
3.16 Installing a microprocessor and heat sink
Use this information to install a microprocessor and heat sink in the blade server.
Note The optional microprocessors that Bull supports are limited by the capacity and capability
of the server. Any microprocessors that you install must have the same specifications as the
microprocessors that came with the blade server.
The following illustration shows how to install a microprocessor and heat sink in the blade
server.
Figure 3-22. Installing the microprocessor
Attention:
1. Do not use any tools or sharp objects to lift the locking lever on the microprocessor
socket. Doing so might result in permanent damage to the system board.
2. Do not touch the contacts in the microprocessor socket. Touching these contacts might
result in permanent damage to the system board.
To install a microprocessor and heat sink, complete the following steps:
1. Read the safety information that begins on page vii and Installation guidelines on
page 23.
2. Carefully lay the blade server on a flat, static-protective surface.