Bull Novascale Blade BL465, Инструкция по установке и эксплуатации, Страница: 61 / 128

Chapter 3. Installing Options
47
3.15 Removing an I/O expansion card
The following sections describe how to remove the following expansion cards:
• CFFh
• CIOv
For information about removing an SSD expansion card, see Removing an SSD expansion
card on page 31.
3.15.1 Removing a CFFh expansion card
Use these instructions to remove a compact-form-factor expansion card from the blade
server.
To remove a CFFh expansion card, complete the following steps:
1. Read the safety information that begins on page vii and Installation guidelines on
page 23.
2. If the blade server is installed in a Blade Chassis, remove it (see Removing the blade
server from the Blade Chassis on page 25).
3. Carefully lay the blade server on a flat, static-protective surface.
4. Open the blade server cover (see Removing the blade server cover on page 26).
5. Locate the CFFh expansion card. The CFFh is installed into the blade expansion
connector (see Blade server connectors on page 21).
6. Locate the release lever on the CFFh expansion card; then, use your finger to lift up on
the release lever to loosen the expansion card from the expansion connector.
7. Use your fingers to hold the edge of the CFFh expansion card where it connects to the
blade expansion connector; then, lift up on the card.
Figure 3-20. Removing a CFFh expansion card
8. Pull the card away from the expansion card standoff.