Bull Novascale Blade BL465, Инструкция по установке и эксплуатации, Страница: 70 / 128

56
novascale Blade BL465 - Installation and User's Guide
Figure 3-25. Attaching the blade server with the scalability tray to the bottom module
a.
Lower the topmost blade server so that the slots at the rear slide down onto the
pins at the rear of the bottom blade server, as shown in the illustration.
b.
b.
Pivot the topmost blade server to the closed position, as shown in the
illustration, until it clicks into place.
4. Install the 2-node scalability card (see Installing the 2-node scalability card on page
58).
3.17.1.1 Installing the scalability tray
Use this information to install the scalability tray on a blade server.
To install the scalability tray, complete the following steps:
1. Before you begin, read the safety information that begins on page vii and Installation
guidelines on page 23.
2. Carefully lay the blade server on a flat, static-protective surface, with the cover side
down.
3. Align the scalability tray flush with the blade server in the start position. The pins on
the scalability tray should be aligned with the holes in the blade server.