Bull Novascale Blade BL465, Инструкция по установке и эксплуатации, Страница: 85 / 128

Chapter 4. Configuring the blade server
71
•
Load Default Settings
Select this choice to cancel the changes that you have made in the settings and restore
the factory settings.
• Exit Setup
Select this choice to exit from the Setup utility. If you have not saved the changes that
you have made in the settings, you are asked whether you want to save the changes
or exit without saving them.
4.3 Using the PXE boot agent utility program
Use the Preboot Execution Environment (PXE) boot agent utility program to select the boot
protocol and other boot options and to select a power-management option.
Notes
•
The blade server does not support Remote Program Load (RPL) selection for the boot
protocol option.
• Enabling PXE might reduce the number of optional expansion modules that your blade
server can manage.
To start the PXE boot agent utility program, complete the following steps:
1. Turn on the server.
2. When the
Broadcom NetXtreme Boot Agent vX.X.X
prompt is
displayed, press Ctrl+S. You have 2 seconds (by default) to press Ctrl+S after the
prompt is displayed.
3. Follow the instructions on the screen to change the settings of the selected items.
4.4 Using the Boot Selection Menu program
The Boot Selection Menu program is a built-in, menu-driven configuration utility program
that you can use to temporarily redefine the first start-up device without changing settings in
the Setup utility.
To use the Boot Selection Menu program, complete the following steps:
1. Turn off the blade server.
2. Restart the blade server.
3. Press F12 (Select Boot Device). If a bootable USB mass storage device is installed, a
submenu item (USB Key/Disk) is displayed.
4. Use the Up Arrow and Down Arrow keys to select an item from the Boot Selection
Menu and press Enter.