Bull Novascale Blade BL465, Инструкция по установке и эксплуатации, Страница: 80 / 128

66
novascale Blade BL465 - Installation and User's Guide
After you configure the blade server, you can install the operating system and update
device drivers (see Chapter 5, Installing the operating system on page 97 for more
information).
4.1 Partitioning a novascale Blade BL465 complex
Before you configure the blade servers that are part of a BL465 complex operating in
single partition mode, you must partition the BL465 complex.
For more information about BL465 complex and operating modes, see Working with a
BL465 Complex on page 12.
To partition a BL465 complex, complete the following steps:
1. From the advanced management module Web interface, click Scalable Complex
→
Configuration.
2. Select one or more of the blade servers that are part of the BL465 complex.
3. Click Available actions
→
Create partition.
4.2 Using the Setup Utility
To start the Setup Utility, complete the following steps:
1. Turn on the blade server (see Turning on the blade server on page 15 ).
2. Immediately give the blade server control of the Blade Chassis shared keyboard,
video, and mouse ports.
−
If you are managing the blade server by using the Blade system console, press the
KVM select button on the blade server (see Blade server controls and LEDs on
page 16 for information).
−
If you are managing the blade server from a remote location, see the
Management Module documentation for information and instructions.
3. When the prompt
Press <F1> Setup
is displayed, press F1. If you have set an
administrator password, you must type the administrator password to access the full
Setup-utility menu. If you do not type the administrator password, a limited Setup-utility
menu is available.
4. Follow the instructions on the screen.
The following menu items are on the Setup utility main menu. Depending on the version of
the Unified Extensible Firmware Interface (UEFI), some menu items might differ slightly from
these descriptions. Use the help within the Setup utility for more information on the
available menu items and selections.