Bull Novascale Blade BL465, Инструкция по установке и эксплуатации, Страница: 87 / 128

Chapter 4. Configuring the blade server
73
4. After you install ASU, use the following command syntax to set the UUID:
asu set SYSTEM_PROD_DATA.SysInfoUUID <uuid_value>
[access_method]
Where:
<uuid_value>
Up to 16-byte hexadecimal value assigned by you.
[access_method]
The access method that you selected to use from the following methods:
•
Online authenticated LAN access, type the command:
[host <imm_internal_ip>] [user <imm_user_id>]
[password <imm_password>]
Where:
imm_internal_ip
The IMM internal LAN/USB IP address. The default value is
169.254.95.118.
imm_user_id
The IMM account (1 of 12 accounts). The default value is
USERID.
imm_password
The IMM account password (1 of 12 accounts). The default value
is PASSW0RD (with a zero, not the letter O).
Note: If you do not specify any of these parameters, ASU will use the
default values. When the default values are used and ASU is unable to
access the IMM using the online authenticated LAN access method, ASU
will automatically use the unauthenticated KCS access method.
The following commands are examples of using the userid and password
default values and not using the default values:
Example that does not use the userid and password default values:
asu set SYSTEM_PROD_DATA.SYsInfoUUID <uuid_value>
user <user_id> password <password>
Example that does use the userid and password default values:
asu set SYSTEM_PROD_DATA.SysInfoUUID <uuid_value>
•
Online KCS access (unauthenticated and user restricted):
You do not need to specify a value for access_method when you use this
access method.
Example:
asu set SYSTEM_PROD_DATA.SysInfoUUID <uuid_value>
The KCS access method uses the IPMI/KCS interface. This method
requires that the IPMI driver be installed. Some operating systems have
the IPMI driver installed by default. ASU provides the corresponding
mapping layer.
See the
Advanced Settings Utility Users Guide for more details.
•
Remote LAN access, type the command:
Note: When using the remote LAN access method to access IMM using
the LAN from a client, the host and the imm_external_ip address are
required parameters.